In the spring, the winter cover is sagging in the center, with a pool of brown water and decaying leaves on top. You have to pump it out before you can remove it, and often some of this water ends up in the pool anyway.
The cause is simple: with nothing to support it, the cover lies flat on the water. Rain and snowmelt accumulate in the center, the weight sinks the middle even further, and all the debris migrates toward this low point.
The pillow does two things at once
It supports the center of the cover. By raising the middle, it creates a slope. Rainwater and debris slide toward the edges instead of accumulating in the center. The cover experiences less tension and lasts longer.
It absorbs ice expansion. When the surface freezes, the ice increases in volume and pushes outward. The pillow, being more flexible than frozen water, compresses and absorbs some of this pressure instead of letting it exert force on the pool walls.
Features
- 4 x 5 ft size
- Placed under the winter cover, on the water's surface
- Grommets to tie it down and keep it centered
- Suitable for round above-ground pools and small basins
- Reusable from one season to the next if stored dry
Installation
-
Inflate it to about two-thirds full, never to capacity. This is the most important point. A slightly soft pillow can compress under the ice, which is exactly its role. A fully inflated pillow becomes rigid and risks bursting in the cold.
- Place it in the center of the pool, on the water.
- Tie it down using its grommets and some rope so that it stays in the middle all winter. A pillow that drifts to the edge is useless.
- Then, install your winter cover over it.
- Remove it at opening, deflate it, and store it in a dry place.
Complete your winterization
Frequently asked questions
How much should it be inflated?
About two-thirds full. It should remain soft to the touch. This flexibility allows it to absorb the pressure of the ice and also prevents it from bursting in extreme cold.
How many do I need?
One is enough for a round above-ground pool or a small basin. On a large inground pool, you often need more than one to properly support the cover. Call us at 450 818-8200 with your dimensions and we will tell you what to plan for.
Does it replace the Gizzmo plug?
No, these are two different types of protection. The Gizzmo screws into the skimmer and prevents it from cracking. The pillow floats under the cover and protects the pool walls. Most pools need both.
Can I use it with a mesh net?
The pillow is designed for a solid winter cover, which it supports to make water run off to the edges. Under a mesh net, which already allows water to pass through, its function against ice pressure is primarily what remains useful.
Is it reusable?
Yes, if stored deflated, dry, and away from rodents. Check for leaks before each season: a pillow that deflates in January no longer protects anything.
Distributed by Piscines Geyser, your pool specialist on the North Shore since 2004.